|
Industrial Gasket and Shim Co., Inc. - Sealants List
Sealants
| Name | Applications | Temperature | Pressure |
|
Duct-Tite
|
- Used as a
sealant for paint ovens, drying ovens and curing ovens
- Used on
heat exchangers and flue stacks
|
800°F |
500 PSI |
|
Hotseal 3000
|
- Excellent Resistance to Erosion by Molten Steel
- Very Low Permeability at Steel Making Temperatures
- Prevents Steel Leakage and Air Aspiration through Refractory Joints
- Temperatures to 3000ºF
- Ready to Use
- Asbestos Free
|
|
|
|
Hylomar®
|
GASKET MAKER - Hylomar can be used as a gasketmaker between precision-machined surfaces with gaps less than 0.10 inch.
GASKET DRESSING - Hylomar is an outstanding dressing for steel, composite, cork, and copper gaskets.
Hylomar allows gaskets to remain fixed to a part during assembly, avoiding troublesome realignment procedures.
THREAD SEALANT - Hylomar provides a chemically resistant seal for threaded fittings that are in contact with automotive fuels or coolants
- Head Gasket Dressing
- Timing Case Covers
- Fuel Pumps
- Gear Boxes
- Oil Pan Gaskets
- 2-Cycle Engine Cases
- Differential Housing
- Fuel/Oil Line Fittings
- Transmission Pan
- Any Finely Machined Surfaces
|
600°F, continuously |
|
|
IGS-1000
|
- Protects
wire insulation and delicate parts during soldering or brazing
- Protects
painted or machined surfaces from flame and welding splash
- Prevents
heat distortion
- Isolates
plumbing joints
|
3000°F |
|
|
Mill-Pac
|
- Sealing
argon gas in molds
- Sealing
open-bottom molds to reduce steel loss
- Sealing
cope and drag foundry molds
- Sealing
hot tops and stress cracks in molds
|
2975°F |
|
|
MP-2000
|
- Sealant
for ingot molds, dummy bars and nozzle gaskets
|
2900°F |
|
|
MP-3000
|
- Sealing
shrouds
- Sealing
slide gate and tundish nozzles
|
2900°F |
|
|
Real Seal
|
Gasket applications handling all chemicals, solvents
and petroleum products. It's perfectly suited for cryogenic
applications. Excellent as a seal for flanges with rough or damaged
surfaces, fragile vessels, pipe and flanges requiring light bolt
torque. |
450°F to 600°F |
|
|
RTV
|
Making formed -in-place gaskets for compressors, gearboxes, pumps, sealing flashing, vents, flues, gutters, interior wall surfaces, marine cabins and windows, sheet metal stacks, ductwork; bonding appliance parts, signs and sign letters; adhering auto trim, appliance trim, name plates |
-75°F to 450°F |
|
|
Silver Seal II
|
- Gasket
dressing or sealant for turbines, boilers, heat exchangers,
compressors, pumps, blowers, piping, ducting, process furnaces and
paint ovens
- Valve
packing in steam valves
- Exhaust
flange seal on motors and turbines
|
950°F |
750 PSI |
|
Steel Seal
|
- On-line
repair of leaking high pressure equipment
- Sealant
for rough or damaged joints
- Sealant
for hot joints (where good heat transfer across the joint is needed)
|
950°F and above. |
750 PSI |
|
Stovemate
|
Used on
bolt-together solid fuel stoves, boilers, heat exhcangers and
fireplace inserts
Used on
stovepipe sections, exhaust stacks and air moving equipment |
|
|
|
Temp-Tite II
|
- Sealant
for gas and steam turbine components
- Blast
furnace flange and valve gasket
- Valve
packing
- Exhaust,
flue and scrubber assemblies
- Inspection cover gasket on pressure vessels
|
950°F |
750-1200 PSI |
|
Turbo "50"
|
- Casing
and bonnet joints on steam and gas turbines
- Threaded
joints on steam, vapor, gas and chemical lines
- Pump,
blower and engine joints
- Boiler
joints
- Cement-binder for gaskets
|
950°F. To 2000°F |
750-4000 PSI |
|
Turbo "R"
|
- Casing
and bonnet joints on steam and gas turbines
- Threaded
joints on steam, vapor, gas and chemical lines
- Pump,
blower and engine joints
- Boiler
joints
- Cement-binder for gaskets
|
950°F. To 2000°F. |
750-4000 PSI |
|
